Front Seat Cushion Outer Trim Panel Replacement 2-Way

1. Remove the front seat. Refer to Front Seat Replacement - Bucket .
2. Remove the trim cover screws from the outer cover of the seat back recliner.
3. Remove the seat back recliner trim cover.



4. Remove the outer trim panel screws from the seat cushion.
5. Remove the trim panel.

Notice: Refer to Title not found in the Preface section.




1. Install the trim panel and secure with the trim panel screws.

Tighten
Tighten the screws to 2.5 N·m (22 lb in).




2. Position the outboard recliner trim cover on the seat and secure with the trim cover screws.

Tighten
Tighten the screws to 2.5 N·m (22 lb in).

3. Install the front seat. Refer to Front Seat Replacement - Bucket .

Front Seat Cushion Outer Trim Panel Replacement 4-Way

1. Remove the front seat. Refer to Front Seat Replacement - Bucket .
2. Remove the riser handle trim by pulling firmly on the trim.



3. Remove the recliner handle trim by pulling firmly on the trim.



4. Remove the trim panel screws.
5. Remove the trim panel from the seat.

Notice: Refer to Title not found in the Preface section.




1. Position the outer trim panel on the seat. Secure the panel with the panel screws.

Tighten
Tighten the screws to 2.5 N·m (22 lb in).




2. Position the cover over the recliner handle. Push firmly to lock the handle into place.



3. Position the cover over the seat riser handle. Push firmly to lock the handle into place.
4. Install the front seat. Refer to Front Seat Replacement - Bucket .