GM Service Manual Online
For 1990-2009 cars only

Removal Procedure

  1. Remove the instrument panel retainer. Refer to Instrument Panel Retainer Replacement in Instrument Panel, Gages, and Console.

  2. Object Number: 1284969  Size: SH
  3. Remove the center air outlet duct push pins from the cross car beam.
  4. Remove the center air outlet duct from the cross car beam.

Installation Procedure

  1. Inspect the seals, and replace if damaged, using Kent Industries adhesive backed foam tape P/N 46485 or equivalent.

  2. Object Number: 1284969  Size: SH
  3. Install the center air outlet duct to the cross car beam.
  4. Install the center air outlet duct push pins to the cross car beam.
  5. Install the instrument panel retainer. Refer to Instrument Panel Retainer Replacement in Instrument Panel, Gages, and Console.