GM Service Manual Online
For 1990-2009 cars only
Makes 🢒 Chevrolet 🢒 2005 🢒 Equinox 🢒 Preface 🢒 Cautions and Notices 🢒 Radio Replacement

Removal Procedure

    Object Number: 977314 Size: SH
  1. Remove the I/P center trim bezel. Refer to Instrument Panel Accessory Bezel Replacement.
  2. Remove the radio screws.

    3. Object Number: 977320 Size: SH
  3. Disconnect the radio electrical connectors and the antenna.

    4. Object Number: 977328 Size: SH
  4. Disconnect the ground strap.
  5. Remove the radio.

Installation Procedure

    Object Number: 977328 Size: SH
  1. Position the radio in the vehicle.
  2. Connect the ground strap.

    3. Object Number: 977320 Size: SH
  3. Connect the electrical connectors and the antenna.

    4. Notice: Refer to Fastener Notice in the Preface section.


    Object Number: 977314 Size: SH
  4. Install the radio screws.

    5. Tighten
    Tighten the screws to 2.5 N·m (22 lb in).

  5. Install the I/P center trim bezel. Refer to Instrument Panel Accessory Bezel Replacement.
  6. Set up the radio. Refer to Control Module References for programming and setup information.