GM Service Manual Online
For 1990-2009 cars only

05 Chevrolet Equinox No Crank with Loss of Communication to BCM, IPC, PCM, TCM, EBCM - kw connector damage data driveability DTC intermittent loose MIL U1000 U1064 U1096 U2105 U2106 U2108 wire

Subject:05 Chevrolet Equinox No Crank With Loss Of Communication To BCM, IPC, PCM, TCM, EBCM

Models:.



The following diagnosis might be helpful if the vehicle exhibits the symptom(s) described in the PI.

Condition/Concern:

No Crank with loss of communication to BCM, IPC, PCM,TCM, and EBCM setting DTC'S U1000, U1064, U1096, U2105, U2106, and U2108.

.

Recommendation/Instructions:

Check connector C3 at Vehicle Communication Interface (VCIM). The field has reported that the C3 connector and wiring at the VCIM was twisted several times causing and intermittent connection for circuit 2500 Tan/Black wire and circuit 2501 Tan wire. The VCIM location is under the left side of the I/P, attached to the acceleration/brake pedal bracket (see SI Document #1424530). Repair the wiring at connector C3 as necessary

.

Please follow this diagnosis process thoroughly and complete each step. If the condition exhibited is resolved without completing every step, the remaining steps do not need to be performed.

Models:

(05 Chevrolet Equinox)

.