GM Service Manual Online
For 1990-2009 cars only
Makes 🢒 Chevrolet 🢒 2006 🢒 Equinox 🢒 Engine 🢒 Engine Electrical 🢒 Knee Bolster Replacement

Removal Procedure

    Object Number: 939650 Size: SH
  1. Remove the screws from the trim panel.
  2. Remove the filler panel by pulling until the trim clips disengage.
  3. Remove the trim panel by pulling on the panel.

Installation Procedure

    Object Number: 939650 Size: SH
  1. Position the outer trim panel.
  2. Push to install the panel.

    3. Notice: Refer to Fastener Notice in the Preface section.

  3. Fasten the screws that hold the left side trim panel to the I/P.

    4. Tighten
    Tighten the screws to 2.5 N·m (22 lb in).