GM Service Manual Online
For 1990-2009 cars only
Makes 🢒 Chevrolet 🢒 2006 🢒 Equinox 🢒 Body 🢒 Wipers/Washer Systems 🢒 Liftgate Wiper Motor Replacement

Removal Procedure
  1. Remove the rear wiper arm. Refer to Rear Window Wiper Arm Replacement .
  2. Remove the liftgate trim panel. Refer to Liftgate Trim Panel Replacement in Body Rear End.

    3. Object Number: 1378647 Size: SH
  3. Remove the rear wiper motor bolts.
  4. Remove the motor by sliding the pivot shaft out of the rear window grommet.
  5. Disconnect the electrical connector.

Installation Procedure

    Object Number: 1378647 Size: SH
  1. Connect the electrical connector.
  2. Install the rear wiper motor through the rear window grommet.

    3. Notice: Refer to Fastener Notice in the Preface section.

  3. Install the wiper motor bolts.

    4. Tighten
    Tighten the bolts to 7 N·m (62 lb in).

  4. Install the liftgate trim panel. Refer to Liftgate Trim Panel Replacement in Body Rear End.
  5. Install the wiper motor module. Refer to Rear Window Wiper Arm Replacement .