Important: Not all listed data parameters are available on all vehicles.
Scan Tool Parameter | Data List | Units Displayed | Typical Data Value |
|---|---|---|---|
Operating Conditions: Ignition ON/Engine ON/Steering wheel centered/No force applied to steering wheel | |||
Actual Motor Current | Data Display and EPS Data List 2 | Amps | 0.0 |
Battery Voltage | Data Display and EPS Data List 1 | Volts | 14.3 |
Desired Motor Current | Data Display and EPS Data List 2 | Amps | 0.0 |
Ignition Cycles Since Last Code Set | EPS Data List 2 | Numeric | 0 |
Ignition Voltage | Data Display and EPS Data List 1 | Volts | 14.3 |
Limiting Motor Current | Data Display | Amps | 58 amps |
Lowest Limiting Current | EPS Data List 2 | Amps | 58 amps |
Motor Voltage + | Data Display and EPS Data List 1 | Volts | 0.0 |
Motor Voltage - | Data Display and EPS Data List 1 | Volts | 0.0 |
Overload Protection Incidents | EPS Data List 2 | Numeric | 0 |
Steering Calibration | EPS Data List 1 | Numeric 1-8 | Varies |
Steering Shaft Torque | EPS Data List 2 | N·m or lb ft | 0.00 |
Torque Sensor Amplified | Data Display | N·m or lb ft | 0.00 |
Torque Sensor Main | Data Display | N·m or lb ft | 0.00 |
Torque Sensor Sub | Data Display | N·m or lb ft | 0.00 |
Tuning Profile | Data Display | Numeric 1-8 | Varies |
Vehicle Speed | Data Display and EPS Data List 1 | km/h or mph | 0 |
9-11 Volt Battery Occurrences | EPS Data List 2 | Numeric | 0 |
