GM Service Manual Online
For 1990-2009 cars only
Makes 🢒 Chevrolet 🢒 2006 🢒 Equinox 🢒 Preface 🢒 Cautions and Notices 🢒 Front Wheel Speed Sensor Replacement

Removal Procedure

    Object Number: 926677 Size: SH
  1. Raise and support the vehicle. Refer to Lifting and Jacking the Vehicle .
  2. Remove the tire and wheel assembly. Refer to Tire and Wheel Removal and Installation .
  3. Remove the brake rotor. Refer to Brake Rotor Replacement .
  4. Disconnect the wheel speed sensor electrical connector.

    5. Object Number: 929664 Size: SH
  5. Remove the wheel speed sensor bolt.
  6. Remove the wheel speed sensor.

Installation Procedure

    Object Number: 929664 Size: SH
  1. Install the wheel speed sensor to the wheel bearing/hub assembly.

    2. Notice: Refer to Fastener Notice in the Preface section.

  2. Install the wheel speed sensor mounting bolt.

    3. Tighten
    Tighten the bolt to 8 N·m (71 lb in).


    Object Number: 926677 Size: SH
  3. Connect the wheel speed sensor electrical connector.
  4. Install the brake rotor. Refer to Brake Rotor Replacement .
  5. Install the tire and wheel assembly. Refer to Tire and Wheel Removal and Installation .
  6. Lower the vehicle.