Tools Required

J 36346 Fascia Retainer Remover

1. Remove the battery tray. Refer to Battery Tray Replacement .



2. Using the J 36346 , disconnect the shift control cable (1) from the transaxle range switch lever (4).
3. Depress the shift control cable retainer clip tabs (2) and remove the shift control cable from the shift control cable bracket (3).



4. Remove the shift control cable bracket bolts.
5. Remove the shift control cable bracket.

1. Install the transaxle shift control bracket.

Notice: Refer to Fastener Notice in the Preface section.

2. Install the transaxle shift control bracket.

Tighten
Tighten the bolts to 25 N·m (18 lb ft).




3. Install the shift control cable (2) to the shift control cable bracket (3). Ensure the shift control cable retaining tabs fully engage the shift control cable bracket.
4. Connect the shift control cable (1) to the transaxle range switch lever (4).
5. Install the battery tray. Refer to Battery Tray Replacement .