GM Service Manual Online
For 1990-2009 cars only
Makes 🢒 Chevrolet 🢒 2008 🢒 Equinox 🢒 Engine 🢒 Engine Mechanical - 2.8L, 3.0L, 3.2L, or 3.6L 🢒 Engine Flywheel Installation

Tools Required

    • EN 46106 Engine Flywheel Holding Tool
    • J 45059 Angle Meter

    Object Number: 1827939 Size: SH
  1. Place the engine flywheel in position on the crankshaft.

    2. Object Number: 1827941 Size: SH
  2. Install 2 NEW bolts in location at the top and bottom of the engine flywheel bolt pattern allowing the engine flywheel to hang in position.

    3. Object Number: 945978 Size: SH
  3. Install the EN 46106 .

    4. Notice: Refer to Fastener Notice in the Preface section.


    Object Number: 1827942 Size: SH
  4. Install the remaining NEW engine flywheel bolts.

    5. Tighten

    1. Tighten the NEW engine flywheel bolts to 30 N·m (22 lb ft).
    2. Tighten the NEW engine flywheel bolts an additional 45 degrees using the J 45059 .

    Object Number: 945978 Size: SH
  5. Remove the EN 46106 .