Driver Seat and Passenger Seat Heater Control Module Scan Tool Information. Chevrolet Equinox 2008

For 1990-2009 cars only

Makes 🢒 Chevrolet 🢒 2008 🢒 Equinox 🢒 Diagnostic Navigation 🢒 Vehicle Diagnostic Information 🢒 Driver Seat and Passenger Seat Heater Control Module Scan Tool Information

Heated Seat Module Scan Tool Data Parameters

Parameter	Expected Value	Definition
Operating Conditions: Ignition ON
Driver Seat Heat Status	Inactive	The scan tool displays Active or Inactive. Active is displayed when the module commands seat heating ON.
Driver Seat HVC Level	Varies	The scan tool displays High, Medium or Low. This is the current level of seat heating as requested by the heated seat switch.
Driver Seat HVC Mode	Varies	The scan tool displays Off, Back & Cushion, Back Only, or Cool. This is the current mode of operation for the driver seat.
Passenger Seat Heat Status	Inactive	The scan tool displays Active or Inactive. Active is displayed when the module commands seat heating ON.
Passenger Seat HVC Level	Varies	The scan tool displays High, Medium or Low. This is the current level of seat heating as requested by the heated seat switch.
Passenger Seat HVC Mode	Varies	The scan tool displays Off, Back & Cushion, Back Only, or Cool. This is the current mode of operation for the passenger seat.
Seat Heat Supply Voltage	Inactive	The scan tool displays Active or Inactive. Active is displayed when the module commands seat heating ON.