Vehicle Certification Label

The vehicle certification label is located on the driver door and displays the following assessments:

1

Name of Manufacturer

2

Gross Vehicle Weight Rating

3

Gross Axle Weight Rating (Front, Rear)

4

Canadian Safety Mark (w/RPO Z49)

5

Certification Statement

6

Vehicle Class Type (Pass Car, etc.)

7

Vehicle Identification Number

8

Date of Manufacture (Mo/Yr)

Tire Placard

The tire placard label is located on the center pillar and displays the following assessments:

9

Specified Occupant Seating Positions

10

Maximum Vehicle Capacity Weight

11

Original Equipment Tires Size

12

Tire Pressure, Front, Rear, and Spare (Cold)

Service Parts ID Label

The vehicle service parts identification label is located in the instrument panel (I/P) compartment. The label is use to help identify the vehicle original parts and options.

13

Model Designation

14

Order Number

15

Exterior Color

16

Paint Technology

17

Vehicle Identification Number

18

Wheel Base

19

Part Number Location

Anti-Theft Label

20

The Federal law requires that General Motors label certain body parts on this vehicle with the VIN. The purpose of the law is to reduce the number of motor vehicle thefts by helping in the tracing and recovery of parts from stolen vehicles.

Labels are permanently affixed to an interior surface of the part. The label on the replacement part contains the letter R, the manufacturer's logo, and the DOT symbol.

The anti-theft label must be covered before any painting, and rustproof procedures, and uncovered after the procedures. Failure to follow the precautionary steps may result in liability for violation of the Federal Vehicle Theft Prevention Standard and possible suspicion to the owner that the part was stolen.