For 1990-2009 cars only

Makes 🢒 Chevrolet 🢒 2008 🢒 Equinox 🢒 Transmission/Transaxle 🢒 Automatic Transmission - 6T70/6T75 🢒 Transmission Control Lever Knob Replacement

Transmission Control Lever Knob Replacement for Chevrolet Equinox 2008

Callout

Component Name

Shift Control Knob Bezel

Tip

•	Removal: carefully insert a small flat-bladed tool between the bezel (1) and the shift knob (3). Apply careful downward pressure to the bezel to separate the bezel from the shift knob. The bezel will drop down approximately 13.0 mm (0.5 in) exposing the shift knob screw (2).

•	Installation: Lift the bezel (1) up to the shift knob (3) until a click sound is heard indicating the bezel is secured to the shift knob.

Shift Control Knob Screw

Notice: Refer to Fastener Notice in the Preface section.

Tip
Loosen the shift control knob screw approximately 4-5 turns. It is not necessary to fully remove the screw from the shift control knob.

Tighten
Tighten the screw to 1.5 N·m (13 lb in).

Shift Control Knob