Notice: Refer to Fastener Notice in the Preface section.

Fastener Tightening Specifications: Refer to Fastener Tightening Specifications .

Preliminary Procedures

1. Remove the instrument panel upper trim pad. Refer to Instrument Panel Upper Trim Panel Replacement.
2. Remove the left instrument panel end cap. Refer to Instrument Panel Outer Trim Cover Replacement - Left Side.
3. Remove the instrument panel cluster trim plate. Refer to Instrument Cluster Trim Panel Replacement.
4. Remove the knee bolster. Refer to Knee Bolster Replacement.
5. Remove the left instrument panel air outlet assembly. Refer to Instrument Panel Outer Air Outlet Replacement - Left Side.

1

Instrument Panel Lower Trim Panel Screw (Qty: 3)

Tighten
2.5 N·m (22 lb in)

2

Instrument Panel Lower Trim Panel Left