GM Service Manual Online
For 1990-2009 cars only
Makes 🢒 Chevrolet 🢒 2008 🢒 Equinox 🢒 Body Hardware and Trim 🢒 Interior Trim and Paneling 🢒 Front Floor Console Front Cup Holder Replacement

Removal Procedure

    Object Number: 1347175 Size: SH
  1. Open the arm rest on the console.
  2. Remove the cupholder cover.
  3. Remove the screws from the cup holder track.
  4. Remove the cup holder and the track from the console.

    5. Object Number: 1347179 Size: SH
  5. Pull to separate the cup holder from the track.

Installation Procedure

    Object Number: 1347179 Size: SH
  1. Install the cup holder to the track.
  2. Position the track in the console assembly.

    3. Notice: Refer to Fastener Notice in the Preface section.

  3. Install the console track screws.

    4. Tighten
    Tighten the screw to 2.5 N·m (22 lb in).

  4. Snap the cupholder cover in place.
  5. Inspect the cupholder for correct operation.