GM Service Manual Online
For 1990-2009 cars only
Makes 🢒 Chevrolet 🢒 2008 🢒 Equinox 🢒 Body Hardware and Trim 🢒 Interior Trim and Paneling 🢒 Front Floor Console Rear Cup Holder Replacement

Removal Procedure
  1. Pull all the way out on the cup holder.
  2. Remove the screws from the cup holder track.

    3. Object Number: 1347188 Size: SH
  3. Remove the cup holder and the track from the console.

Installation Procedure

    Notice: Refer to Fastener Notice in the Preface section.


    Object Number: 1347188 Size: SH
  1. Install the console track screws.

    2. Tighten
    Tighten the screw to 2.5 N·m (22 lb in).

  2. Verify the rear cup holder for correct operation.