Underhood Electrical Center or Junction Block Bracket Replacement. Chevrolet Equinox 2008

For 1990-2009 cars only

Makes 🢒 Chevrolet 🢒 2008 🢒 Equinox 🢒 Power and Signal Distribution 🢒 Wiring Systems and Power Management 🢒 Underhood Electrical Center or Junction Block Bracket Replacement

Callout	Component Name
Preliminary Procedure Remove the underhood electrical center or junction block. Refer to Underhood Electrical Center or Junction Block Replacement.
1	Underhood Electrical Center or Junction Block Bracket Bolt Notice: Refer to Fastener Notice in the Preface section. Procedure Remove the electrical connector inside the block before removing the bracket. Tighten 20 N·m (15 lb ft)
2	Underhood Electrical Center or Junction Block Bracket

Callout

Component Name

Preliminary Procedure

Remove the underhood electrical center or junction block. Refer to Underhood Electrical Center or Junction Block Replacement.

Underhood Electrical Center or Junction Block Bracket Bolt

Notice: Refer to Fastener Notice in the Preface section.

Procedure

Remove the electrical connector inside the block before removing the bracket.

Tighten
20 N·m (15 lb ft)

Underhood Electrical Center or Junction Block Bracket