Notice: Refer to Fastener Notice in the Preface section.

Fastener Tightening Specifications: Refer to Fastener Tightening Specifications.

Preliminary Procedures

1. Remove the front seat. Refer to Front Seat Replacement - Bucket.
2. Adjust the lumbar support knob until the lumbar basket is in the position of least support.
3. Pull back on the lumbar cable sleeve.
4. Remove the barrel end of the cable from the lumbar actuator.

1

Front Seat Recliner Handle

Tip
Pull firmly forward on the handle to remove.

2

Front Seat Outer Adjuster Finish Cover

Refer to Front Seat Cushion Outer Trim Panel Replacement.

3

Front Seat Belt Buckle

Refer to Front Seat Belt Buckle Replacement.

4

Front Seat Inner Adjuster Finish Panel

Refer to Front Seat Cushion Inner Trim Panel Replacement.

5

Front Seat Lumbar Support Actuator Knob

Tip
Remove the lumbar knob by pulling firmly on the knob.

6

Front Seat Cushion Cover and Pad

Refer to Front Seat Cushion Cover and Pad Replacement.

7

Front Seat Lumbar Support Actuator Screw (Qty: 2)

Tighten
2 N·m (18 lb in)

8

Front Seat Lumbar Support Actuator