GM Service Manual Online
For 1990-2009 cars only
Makes 🢒 Chevrolet 🢒 2009 🢒 Equinox 🢒 Engine 🢒 Engine Cooling 🢒 Fuel Injector Sight Shield Replacement

Removal Procedure

    Object Number: 1870244 Size: SH
  1. Remove the oil cap (1) and the oil filler tube (2).
  2. Disconnect the exhaust gas recirculation (EGR) electrical connector (3).

    3. Object Number: 1870245 Size: SH
  3. Remove the injector sight shield from the studs.

    4. Object Number: 1870247 Size: SH
  4. If replacing the sight shield studs, remove the studs from the intake manifold.

Installation Procedure

    Caution: Refer to Fastener Caution in the Preface section.


    Object Number: 1870247 Size: SH
  1. If the injector sight shield studs were removed, install the studs to the intake manifold and tighten to 10 N·m (89 lb in).

    2. Object Number: 1870245 Size: SH
  2. Install the injector sight shield to the studs.

    3. Object Number: 1870244 Size: SH
  3. Connect the EGR electrical connector (3).
  4. Install the oil filler tube (2) and the oil cap (1).