GM Service Manual Online
For 1990-2009 cars only
Makes 🢒 Chevrolet 🢒 2009 🢒 Equinox 🢒 Engine 🢒 Engine Mechanical - 3.4L 🢒 Crankshaft Balancer Removal

Special Tools

    • EN 46359 Puller End Protector
    • EN-49010 Flywheel Holding Tool
    • J 41816-A Crankshaft Balancer Remover

For equivalent regional tools, refer to Special Tools.


    Object Number: 2044840 Size: SH
  1. Install the EN-49010 tool to the starter mounting holes.

    2. Object Number: 909519 Size: SH
  2. Remove the crankshaft balancer bolt and washer.

    3. Object Number: 909522 Size: SH

    Caution: Do NOT use a power-assisted tool with the special tool in order to remove or install this component. You cannot properly control the alignment of this component using a power-assisted tool, and this can damage the component.

  3. Remove the crankshaft balancer using the J 41816-A remover along with EN 46359 protector or equivalent.
  4. Remove the EN-49010 tool .