Steering Wheel Control Switch Assembly Replacement. Chevrolet Equinox 2009

For 1990-2009 cars only

Makes 🢒 Chevrolet 🢒 2009 🢒 Equinox 🢒 Diagnostic Navigation 🢒 Vehicle Diagnostic Information 🢒 Steering Wheel Control Switch Assembly Replacement

Steering Wheel Control Switch Assembly Replacement Equinox

Use a small flat-bladed tool to release the switch assembly from the steering wheel.
Disconnect the cruise switch electrical harness connector from the switch.

Connect the switch electrical harness connector to the switch. Push in the connector until a click is heard and pull back to confirm a positive engagement.
Insert the cruise switch into the steering wheel and gently apply pressure to fasten the switch in the opening.

Callout	Component Name
Preliminary Procedure Remove the inflatable restraint steering wheel module. Refer to Steering Wheel Inflatable Restraint Module Replacement.
1	Steering Wheel Control Assembly Screw Caution: Refer to Fastener Caution in the Preface section. Tighten 2 N·m (18 lb in)
2	Steering Wheel Control Assembly

Callout

Component Name

Remove the inflatable restraint steering wheel module. Refer to Steering Wheel Inflatable Restraint Module Replacement.

Steering Wheel Control Assembly Screw

Caution: Refer to Fastener Caution in the Preface section.

Tighten
2 N·m (18 lb in)

Steering Wheel Control Assembly