Removal Procedure
- Loosen the clamps at both ends of the air cleaner intake duct.
- Remove the positive crankcase ventilation (PCV) fresh air pipe from the air cleaner intake duct.
- Remove the air cleaner intake duct from the mass air flow (MAF) sensor and throttle body.
Installation Procedure
- Install the air cleaner intake duct to the MAF sensor and throttle body.
- Install the PCV fresh air pipe to the air cleaner intake duct.
Caution: Refer to Fastener Caution in the Preface section.
- Tighten the clamps at both ends of the air cleaner intake duct.
Tighten
Tighten the clamps to 4 N·m (35 lb in).