Callout
| Component Name
|
1
| Windshield Wiper Arm Nut (Qty: 4)
Caution: Refer to Fastener Caution in the Preface section.
Tighten
28 N·m (21 lb ft) |
2
| Windshield Wiper Arm Assembly
Tip
| • | Position the driver side wiper blade assembly at the dot in lower portion of windshield blackout strip. |
| • | Position the passenger side wiper blade assembly at the dot in windshield pillar portion of windshield blackout strip. |
|
3
| Windshield Wiper Transmission Bolt (Qty: 4)
Tip
Remove the air inlet grille panel to access the wiper transmission bolts. Refer to
Air Inlet Grille Panel Replacement.
Tighten
12 N·m (9 lb ft) |
4
| Windshield Wiper Transmission Assembly
Procedure
- Disconnect the electrical connector from the wiper motor.
- Transfer the wiper motor to the new transmission assembly. Refer to
Windshield Wiper Motor Replacement.
- After installation of the transmission, turn the key to RUN position and cycle wiper system to ensure wiper motor is in the park position before installing the wiper arms.
|
