Preliminary Procedures

1. Remove the rear quarter lower trim panel. Refer to Quarter Lower Rear Trim Panel Replacement.
2. Loosen the retractor anchor bolt cover on the upper rear pillar. Gently unsnap cover or it may break from too much force.

1

Rear Seat Belt Retractor Bolt (Qty: 3)

Caution: Refer to Fastener Caution in the Preface section.

Tip
Apply Permatex® 24200 or equivalent on all seat belt fasteners prior to installation.

Tighten
45 N·m (33 lb ft)

2

Rear Seat Belt Retractor

Tip
Make sure alignment slots are aligned correctly on reinstallation.