GM Service Manual Online
For 1990-2009 cars only
Makes 🢒 Chevrolet 🢒 2009 🢒 Equinox 🢒 Body Repair 🢒 Bolted Exterior Body Panels and Closures 🢒 Hood Primary Latch Release Cable Replacement

Removal Procedure
  1. Open the hood.
  2. Remove the hood latch. Refer to Hood Primary and Secondary Latch Replacement .

    3. Object Number: 930872 Size: SH
  3. Remove the hood primary latch release cable from the structure. Note the routing of the hood cable in the engine compartment for installation.

    4. Object Number: 965599 Size: SH
  4. Inside the vehicle, remove the left front carpet retainer. Refer to Front Carpet Retainer Replacement .
  5. Reposition the carpet aside to expose release handle.

    6. Object Number: 930888 Size: SH
  6. Pull release handle to up position.
  7. Pry back front of handle slip to disengage from the hinge pillar.
  8. Remove the hood primary latch release cable grommet from the front of the dash and remove the cable from the core support.

Installation Procedure

    Object Number: 930888 Size: SH
  1. Install the hood primary latch release cable and grommet through the front of the dash.
  2. Slide the hood release handle into the hinge pillar and secure into place.

    3. Object Number: 965599 Size: SH
  3. Reposition the carpet and install the front carpet retainer. Refer to Front Carpet Retainer Replacement .

    4. Object Number: 930872 Size: SH
  4. Route the hood cable through the body structure.
  5. Install the hood latch. Refer to Hood Primary and Secondary Latch Replacement .
  6. Inspect the hood primary latch release cable for proper operation.
  7. Close the hood.