Preliminary Procedures

1. Remove the front wheelhouse liner. Refer to Front Wheelhouse Liner Replacement.
2. Remove the front bumper air deflector. Refer to Front Bumper Fascia Air Deflector Replacement.

1

Front Bumper Fascia Bolt (Qty: 4)

Caution: Refer to Fastener Caution in the Preface section.

Tighten
2 N·m (18 lb in)

2

Front Bumper Fascia Screw (Qty: 2)

Tighten
2 N·m (18 lb in)

3

Front Bumper Fascia

Procedure

1. Disconnect any electrical connectors.
2. Transfer components as necessary.

Preliminary Procedure

Remove the front wheelhouse liners. Refer to Front Wheelhouse Liner Replacement.

1

Front Fascia Lower Retainer (Qty: 3)

2

Front Fascia Bolt (Qty: 2)

Caution: Refer to Fastener Caution in the Preface section.

Tighten
3 N·m (25 lb in)

3

Front Fascia Upper Retainer (Qty: 3)

4

Front Fascia Assembly

Procedure

1. Disconnect the electrical connectors.
2. If replacing the fascia assembly, transfer parts as necessary.

Preliminary Procedure

Remove the front bumper air deflector. Refer to Front Bumper Fascia Air Deflector Replacement.

1

Plastic Push-In Retainer (Qty: 6)

2

Fascia to Fender Screw (Qty: 2)

Caution: Refer to Fastener Caution in the Preface section.

Tighten
2 N·m (18 lb in)