Preliminary Procedures

Remove the Rear Wheelhouse liner. Refer to Rear Wheelhouse Panel Liner Replacement

1

Rear Bumper Upper Fascia Bolt (Qty: 2)

Caution: Refer to Fastener Caution in the Preface section.

Tighten
6 N·m (53 lb in)

2

Rear Bumper Fascia to Fender Screw (Qty: 2)

Tighten
2 N·m (18 lb in)

3

Plastic Push Pin Retainer (Qty: 4)

4

Rear Bumper Fascia

Procedure

1. Disconnect any electrical connectors as needed.
2. Pull gently on the sides of the rear bumper fascia to disengage from the rear quarter panels.
3. Transfer any parts as needed.