Preliminary Procedures

1. Disable the supplemental inflatable restraint (SIR) system. Refer to SIR Disabling and Enabling.
2. Remove the shift control lever knob. Refer to Transmission Control Lever Knob Replacement.
3. Remove the center trim bezel. Refer to Instrument Panel Accessory Bezel Replacement.
4. Remove the console trim plate. Refer to Console Trim Plate Replacement.
5. Disconnect the shift control cable. Refer to Shift Control Cable Replacement.
6. Disconnect the shift control electrical connector.

1

Shift Control Nut (Qty: 4)

Caution: Refer to Fastener Caution in the Preface section.

Tighten
25 N·m (18 lb ft).

2

Shift Control