Fastener Tightening Specifications: Refer to Fastener Notice , in Cautions and Notices.

Lifting and Jacking Caution. Refer to (Link Disabled-For Test) in Cautions and Notices.

Battery Disconnect Caution in Cautions and Notices.

1

Bolt, Side Rail Reinforcement (Qty: 4)

Notice: Refer to Fastener Notice in the Preface section.

Tighten: to 100 N·m (74 lb ft).

2

Bolt, Front Suspension Frame (Qty: 4)

Tighten: to First Pass 100 N·m (74 lb ft). Final Pass + 90°.

3

Reinforcement, Left Side Rail

4

Reinforcement, Right Side Rail

5

Retainer, Frame Insulator (Qty: 2)

6

Frame, Drivetrain and Front Suspension

• Tip: Tie a rope around the radiator/condenser tabs and the upper tie bar to support the radiator/condenser.

Tools Required

7

Bolt, Condenser Radiator Fan Module Support Bracket (Qty: 2)

Tighten: to 60 N·m (44 lb ft).

8

Bracket, Left Condenser Radiator Fan Module Support

9

Bracket, Right Condenser Radiator Fan Module Support

10

Insulator, Frame Upper (Qty: 4)

11

Insulator, Frame Rear (Qty: 2)

12

Insulator, Frame Front (Qty: 2)