Fastener Tightening Specifications. Refer to Fastener Tightening Specifications (Link disabled for test).

1

Lever, Driver Seat Lumbar Support Actuator

Tip: The lever is a press fit design.

2

Clip, Driver Seat Recliner Handle Spring

3

Handle, Driver Seat Recliner

4

Screw, Driver Seat Cushion Outer Finish Panel

Tighten: to 2.5 N·m (22 lb in).

5

Knob , Driver Seat Adjuster Switch

6

Panel, Driver Seat Cushion Outer Finish

Tip: Slide the panel toward the rear of the vehicle. Remove the panel from the recliner end first.

7

Bolt, Seat Belt Anchor

Tighten: to 32 N·m (24 lb ft).

8

Switch, Driver Seat Heater

9

Switch, Driver Seat Adjuster