Tools Required

J 28662 Brake Pedal Effort Gauge

Check the brake pedal travel at frequent intervals. Brake pedal travel is the distance the brake pedal moves toward the floor from a fully released position. Make this check with the brakes cold and with tool J 28662 .

1. With the engine off, press the brake pedal and release the brake pedal. Do this five times in order to release vacuum from the vacuum booster.



2. Measure the distance (1) from the bottom of the steering wheel to the brake pedal with the brake pedal released.
3. Apply about 455 N (100 lb) on the brake pedal. Use the J 28662 .
4. Measure the distance (2) from the bottom of the steering wheel to the brake pedal.
5. Subtract the first measurement (1) from the second measurement (2).
6. Compare the difference with the specifications. Refer to Brake System Specifications . If the brake pedal travel exceeds specifications, refer to Brake Pedal Excessive Travel .