Was the Headlight System Check performed?

--

Go to Step 2

Go to Headlight System Check

1. Disconnect the connector at the headlamp switch.
2. Disconnect connector C200 at the steering column.
3. Connect an unpowered test lamp between connector C200, cavity E13 for CKT 10 (YEL), and ground.

Does the test lamp light?

--

Go to Step 3

Go to Step 4

Repair the short to voltage in CKT 10 (YEL) between the following components:

Do the low beam headlamps operate properly?

--

Go to Headlight System Check

Go to Step 4

Replace the headlamp switch.

Do the low beam headlamps operate properly?

--

Go to Headlight System Check

--