Step | Action | Value(s) | Yes | No |
|---|---|---|---|---|
1 | Has the Remote Keyless Entry System Check been performed? | -- | Go to Step 2 | |
2 |
Did the test lamp light? | -- | Go to Step 3 | Go to Step 4 |
3 | Connect an unpowered test lamp between remote control door lock receiver connector cavity F for CKT 540 (ORN) and ground. Did the test lamp light? | -- | Go to Step 5 | Go to Step 6 |
4 | Repair the open in CKT 540 (ORN) between S228 remote control door lock receiver connector cavity E. Do the locks operate properly? | -- | Go to Step 3 | |
5 |
Did the test lamp light? | -- | Go to Step 7 | Go to Step 8 |
6 | Repair the open in CKT 540 (ORN) between S228 and remote control door lock receiver connector cavity F. Do the locks operate properly? | -- | Go to Step 5 | |
7 |
Does the good transmitter work? | -- | Go to Step 9 | Go to Step 10 |
8 | Repair the open in CKT 150 (BLK) between the remote control door lock receiver and S206. Do the locks operate properly? | -- | Go to Step 7 | |
9 | Replace the old transmitter(s). Is the repair complete? | -- | -- | |
10 | Replace the remote control door lock receiver. Refer to Transmitter Programming . Is the repair complete? | -- | -- |
