GM Service Manual Online
For 1990-2009 cars only
Makes 🢒 Chevrolet 🢒 2002 🢒 Express 🢒 Engine 🢒 Engine Electrical 🢒 Air Cleaner Assembly Replacement

Removal Procedure

    Object Number: 183467 Size: SH
  1. Loosen the upper air intake duct clamp and remove the duct.

    2. Object Number: 183474 Size: SH
  2. Remove the air cleaner mounting bolts.

    3. Object Number: 183478 Size: SH
  3. Remove the air cleaner assembly.
    4. • Inspect the seals for damage.
    • Inspect the air cleaner element for damage or excessive dirt accumulation. Replace any part as necessary.

Installation Procedure

    Object Number: 183478 Size: SH
  1. Install the air cleaner assembly.

    2. Object Number: 183467 Size: SH

    Notice: Use the correct fastener in the correct location. Replacement fasteners must be the correct part number for that application. Fasteners requiring replacement or fasteners requiring the use of thread locking compound or sealant are identified in the service procedure. Do not use paints, lubricants, or corrosion inhibitors on fasteners or fastener joint surfaces unless specified. These coatings affect fastener torque and joint clamping force and may damage the fastener. Use the correct tightening sequence and specifications when installing fasteners in order to avoid damage to parts and systems.

  2. Install the upper intake duct and clamp.

    3. Tighten
    Tighten the clamp to 4 N·m (35 lb in).


    Object Number: 183474 Size: SH
  3. Install the air cleaner mounting bolts.

    4. Tighten
    Tighten the bolts to 11 N·m (97 lb in).