GM Service Manual Online
For 1990-2009 cars only
Makes 🢒 Chevrolet 🢒 2002 🢒 Express 🢒 Steering 🢒 Steering Wheel and Column 🢒 Shift Lever Replacement - On Vehicle

Removal Procedure
  1. Roll the shift lever boot back until the TORX® head screw is exposed.

    2. Object Number: 375322 Size: SH
  2. Remove the TORX® head screw.
  3. Remove the shift lever.

Installation Procedure
  1. Install the shift lever.

    2. Object Number: 375322 Size: SH

    Notice: Use the correct fastener in the correct location. Replacement fasteners must be the correct part number for that application. Fasteners requiring replacement or fasteners requiring the use of thread locking compound or sealant are identified in the service procedure. Do not use paints, lubricants, or corrosion inhibitors on fasteners or fastener joint surfaces unless specified. These coatings affect fastener torque and joint clamping force and may damage the fastener. Use the correct tightening sequence and specifications when installing fasteners in order to avoid damage to parts and systems.

  2. Install the TORX® head screw.

    3. Tighten
    Tighten the TORX® head screw to 18 N·m (14 lb in).

  3. Roll the shift lever boot over the TORX® head screw.