Overhead Console Replacement - Intermediate for Chevrolet Express 2002

Overhead Console Replacement - Intermediate Luxury Y91

1. Remove the screws from the overhead console.
2. Remove the screw from the dome lamp housing.
3. Remove the overhead console by pulling down in order to release the retaining clips from the mounting bracket.
4. Disconnect the electrical connectors from the overhead console.

1. Connect the electrical connectors to the overhead console.
2. Install the overhead console by pushing up the console in order to engage the retaining clips into the mounting bracket.

Notice: Use the correct fastener in the correct location. Replacement fasteners must be the correct part number for that application. Fasteners requiring replacement or fasteners requiring the use of thread locking compound or sealant are identified in the service procedure. Do not use paints, lubricants, or corrosion inhibitors on fasteners or fastener joint surfaces unless specified. These coatings affect fastener torque and joint clamping force and may damage the fastener. Use the correct tightening sequence and specifications when installing fasteners in order to avoid damage to parts and systems.

3. Install the screws that retain the overhead console to the mounting bracket.

Tighten
Tighten the overhead console screws to 2 N·m (18 lb in).

4. Install the screw to the inside of the dome lamp housing.

Tighten
Tighten the screw to 2 N·m (18 lb in).