Transmission Case and Adapter Disassemble CTS, GTO, SSR M10
Transmission Case
Tools Required
• | J 39790
Mainshaft
Bearing Race Remover |
• | J 39791
Countershaft
Bearing Race Remover |
- Remove the transmission case fill plug.
- Remove the temperature switch (M12 only).
- Remove the backup lamp switch.
- Remove the dowel pins.
Important: Do not replace the bearing race unless inspection
shows bearing race damage.
- Remove the countershaft bearing race, using the
J 8092
and the
J 39791
.
Important: Do not replace the bearing race unless inspection
shows bearing race damage.
- Remove the mainshaft bearing race, using the
J 8092
and the
J 39790
.
- Remove the Ist/2nd and the 3rd/4th shift
shaft bushings, using the
J 23907
and
the
J 39439-2
.
Adapter Plate
Tools Required
- Remove the input shaft
bearing race and the shim.
- Remove the countershaft
bearing race and the shim.
- Remove the adapter plate
plug.
- Remove the input shaft
seal.
Important: Do not replace the bushing unless inspection shows bushing damage.
- Remove the 1st/2nd and
the 3rd/4th shift shaft bushing, using the
J 23907
with the
J 39439-2
.
- Remove the dowel pins.
Transmission Case and Adapter Disassemble Corvette MM6 and MZ6
Transmission Case
Tools Required
• | J 8092
Universal Driver Handle |
• | J 39790
Mainshaft Bearing Race Remover |
• | J 39791
Countershaft Bearing Race Remover |
- Remove the transmission case fill plug (1) (MM6 only).
- Remove the coolant temperature switch (2) (MZ6 only).
- Remove the reverse lamp switch (MM6 only).
- Remove the E-Z key switch (1) (MZ6 only).
- Remove the dowel pins.
Important: Do not replace the bearing race unless inspection shows bearing race damage.
- Remove the countershaft bearing race, using the
J 8092
and the
J 39791
.
Important: Do not replace the bearing race unless inspection shows bearing race damage.
- Remove the mainshaft bearing race, using the
J 8092
and the
J 39790
.
- Remove the 1st/2nd and the 3rd/4th shift shaft bushings, using the
J 23907
and
the
J 39439-2
.
Adapter Plate
Tools Required
- Remove the input shaft bearing race and the shim.
- Remove the countershaft bearing race and the shim.
- Remove the adapter plate plug (MM6 only).
- Remove the input shaft seal.
Important: Do not replace the bushing unless inspection shows bushing damage.
- Remove the 1st/2nd and the 3rd/4th shift shaft bushing, using the
J 23907
with the
J 39439-2
.
- Remove the 1st/2nd and the 3rd/4th shift shaft seals (1) and (2).
- Remove the dowel pins.