Inflatable Restraint Side Impact Sensor Replacement - Right Side Rear. Chevrolet Express 2008

For 1990-2009 cars only

Makes 🢒 Chevrolet 🢒 2008 🢒 Express 🢒 Diagnostic Navigation 🢒 Vehicle Diagnostic Information 🢒 Inflatable Restraint Side Impact Sensor Replacement - Right Side Rear

Inflatable Restraint Side Impact Sensor Replacement - Right Side Rear with E24

Callout	Component Name
Preliminary Procedure Caution: Refer to SIR Caution in the Preface section. Caution: Refer to SIR Inflator Module Handling and Storage Caution in the Preface section. Caution: In order to prevent SIR deployment, personal injury, or unnecessary SIR system repairs, do not strike the door or the door pillar in the area of the side impact sensor (SIS). Turn OFF the ignition and remove the key when performing service in the area of the SIS. Disable the SIR system. Refer to SIR Disabling and Enabling . Remove the rear door step mat. Refer to Rear Side Door Step Mat Replacement .
1	Side Impact Inflatable Restraint Sensor - Right Procedure Disconnect the electrical connector. Notice: Refer to Fastener Notice in the Preface section. Loosen the side impact inflatable restraint sensor bolts. (Qty: 2) Tighten 7 N·m (62 lb in) Remove the side impact inflatable restraint sensor from the vehicle. Tip The bolts are an integral part of the sensor and should remain with the sensor.

Callout

Component Name

Preliminary Procedure

Caution: Refer to SIR Caution in the Preface section.

Caution: Refer to SIR Inflator Module Handling and Storage Caution in the Preface section.

Caution: In order to prevent SIR deployment, personal injury, or unnecessary SIR system repairs, do not strike the door or the door pillar in the area of the side impact sensor (SIS). Turn OFF the ignition and remove the key when performing service in the area of the SIS.

Disable the SIR system. Refer to SIR Disabling and Enabling .
Remove the rear door step mat. Refer to Rear Side Door Step Mat Replacement .

Side Impact Inflatable Restraint Sensor - Right

Procedure

Disconnect the electrical connector.

Notice: Refer to Fastener Notice in the Preface section.

Loosen the side impact inflatable restraint sensor bolts. (Qty: 2)

Tighten
7 N·m (62 lb in)

Remove the side impact inflatable restraint sensor from the vehicle.

Tip
The bolts are an integral part of the sensor and should remain with the sensor.

Inflatable Restraint Side Impact Sensor Replacement - Right Side Rear withYA2

Callout	Component Name
Preliminary Procedure Caution: Refer to SIR Caution in the Preface section. Caution: Refer to SIR Inflator Module Handling and Storage Caution in the Preface section. Caution: In order to prevent SIR deployment, personal injury, or unnecessary SIR system repairs, do not strike the door or the door pillar in the area of the side impact sensor (SIS). Turn OFF the ignition and remove the key when performing service in the area of the SIS. Disable the SIR system. Refer to SIR Disabling and Enabling . Remove the rear door step mat. Refer to Rear Side Door Step Mat Replacement .
1	Side Impact Inflatable Restraint Sensor - Right Procedure Disconnect the electrical connector. Notice: Refer to Fastener Notice in the Preface section. Loosen the side impact inflatable restraint sensor bolts. (Qty: 2) Tighten 7 N·m (62 lb in) Remove the side impact inflatable restraint sensor from the vehicle. Tip The bolts are an integral part of the sensor and should remain with the sensor.