Preliminary Procedures

1. Remove the steering column tilt spring. Refer to Steering Column Tilt Spring Replacement.
2. Remove the ignition lock cylinder case. Refer to Ignition Lock Cylinder Case Replacement.

1

Steering Column Pivot Pin (Qty: 2)

Procedure

1. Use remover J 21854-01 to remove the steering column pivot pins.
2. Before installing, lubricate the steering column pivot pins with the GM recommended lubricant.
3. Once installed, stake the steering column in 3 locations around each steering column pivot pin.

Special Tools

J 21854-01 Pivot Pin Remover

2

Steering Column Tilt Head

Procedure

Transfer the turn signal switch bracket if needed.

Tip
Do not allow any debris into the steering column tilt head.