Preliminary Procedure

Caution: Refer to SIR Caution in the Preface section.

Caution: Refer to SIR Inflator Module Handling and Storage Caution in the Preface section.

Caution: In order to prevent SIR deployment, personal injury, or unnecessary SIR system repairs, do not strike the door or the door pillar in the area of the side impact sensor (SIS). Turn OFF the ignition and remove the key when performing service in the area of the SIS.

1. Disable the SIR system. Refer to SIR Disabling and Enabling .
2. Remove the rear headliner assembly. Refer to Headlining Rear Trim Panel Replacement .

1

Rear Roof Side Rail Inflatable Restraint Module Assembly

Procedure

1. Disconnect the electrical connector.

Notice: Refer to Fastener Notice in the Preface section.

2. Loosen the roof side rail inflatable restraint module bolts. (Qty: 6)

Tighten
9 N·m (80 lb in)

3. Remove the push in retainers (Qty: 8) securing the roof side rail inflatable restraint module to the vehicle.
4. Remove the roof side rail inflatable restraint module from the vehicle.

Tip
The bolts and the push in fasteners are an integral part of the module and should remain with the module.