Engine Front Cover Removal RPO LY2/LMF
- Remove the front cover bolts (1).
- Remove the front cover (2) and gasket (3).
- Discard the front cover gasket.
- Remove the oil seal (4).
- Remove the bolts (1, 6), camshaft position (CMP) sensor (2), and wire harness (5).
- Remove the O-ring (3) from the sensor, as required.
Engine Front Cover Removal RPO LY6
- Remove the front cover bolts (501).
- Remove the front cover (502) and gasket (503).
- Discard the front cover gasket.
- Remove the camshaft position (CMP) sensor wire harness (737) and bolts (738).
- Remove the CMP sensor (703).
- Remove the O-ring (704) from the sensor, as required.
- Remove the CMP actuator magnet (752), bolts (751), and gasket (753).
- Remove the oil seal (140).