For 1990-2009 cars only
- Remove the drive belt. Refer to Drive Belt Replacement.
- Position a 3/8-inch drive breaker bar into the drive belt tensioner opening and rotate the tensioner counterclockwise.
- Move the drive belt tensioner through its full travel.
- If any binding is observed, replace the drive belt tensioner. Refer to Drive Belt Tensioner Replacement.
- Install the drive belt. Refer to Drive Belt Replacement.
Caution: Allowing the drive belt tensioner to snap into the free position may result in damage to the tensioner.
Note: When the engine is operating the drive belt tensioner arm will move. Do not replace the drive belt tensioner because of movement in the drive belt tensioner arm.
| • | The movement should feel smooth |
| • | There should be no binding |
| • | The tensioner should return freely |
