GM Service Manual Online
For 1990-2009 cars only

Spring Bumper Replacement 1500 and 2500 w/7300 GVW

Removal Procedure


    Object Number: 830220  Size: SH
  1. Raise and support the vehicle. Refer to Lifting and Jacking the Vehicle .
  2. Remove the jounce bumper.

Installation Procedure


    Object Number: 830220  Size: SH
  1. Install the jounce bumper.
  2. Lower the vehicle.

Spring Bumper Replacement 2500 w/8500/8600 GVW and 3500-9Q4

Removal Procedure


    Object Number: 830219  Size: SH
  1. Raise the vehicle. Refer to Lifting and Jacking the Vehicle .
  2. Support the vehicle with suitable safety stands.
  3. Lift upward on the front side of the bumper.
  4. Slide the rear axle bumper forward in order to free the bumper from the bracket.

Installation Procedure


    Object Number: 830219  Size: SH
  1. Slide the bumper rearward.
  2. Ensure that the rear axle bumper is seated into the bracket.
  3. Remove the safety stands.
  4. Lower the vehicle.