GM Service Manual Online
For 1990-2009 cars only
Makes 🢒 Chevrolet 🢒 2009 🢒 Express 🢒 Body Systems 🢒 Wipers and Washers 🢒 Air Inlet Grille Panel Replacement

Removal Procedure
  1. Raise and support the hood.

    2. Object Number: 885336 Size: SH
  2. Remove the screws (1-7), retaining the air inlet grille panels to the cowl vent.
  3. Remove the wiper arms from the vehicle. Refer to Windshield Wiper Arm Replacement.
  4. Disconnect the washer hoses from the air inlet grille panel.
  5. Remove the air inlet grille panels from the vehicle.

Installation Procedure

    Object Number: 885336 Size: SH
  1. Install the air inlet grille panels to the vehicle.
  2. Align the retainers in the body with the tabs on the grille panel. Press the retainers into place.
  3. Connect the washer hoses to the air inlet grille panel.
  4. Install the wiper arms to the vehicle. Refer to Windshield Wiper Arm Replacement.

    5. Caution: Refer to Fastener Caution in the Preface section.

  5. Install the screws in sequential order (1-7), to retain the air inlet grille panels to the cowl vent and tighten to 1.7 N·m (15 lb in).
  6. Close the hood.