Removal Procedure
- Disconnect the release cable from the brake lever.
- Disconnect the cable from the retainer on the brake lever.
- Remove the park brake release lever handle mounting bolt.
- Remove the release handle from the instrument panel retainer.
- Remove the release handle and cable from the vehicle. Note the routing of the cable as you remove the park release handle assembly from the vehicle.
Installation Procedure
- Install the release handle and the cable to the vehicle. Install the cable using the same routing as the original cable.
- Install the release handle to the instrument panel retainer.
Caution: Refer to Fastener Caution in the Preface section.
- Install the park brake release lever handle mounting bolt and tighten to
10 N·m (89 lb in).
- Connect the cable to the retainer on the brake lever.
- Connect the release cable to the lever.