GM Service Manual Online
For 1990-2009 cars only

Removal Procedure


    Object Number: 879684  Size: SH
  1. Remove the inside door handle bezel. Refer to Rear Door Inside Handle Bezel Replacement.
  2. Remove the screw (1) from the door trim plate (2).
  3. Partially remove the trim plate (2) from the door trim panel.
  4. Disconnect the electrical connectors from the door lock switch, if equipped.
  5. Remove the front door trim plate (2) from the vehicle.

Installation Procedure


    Object Number: 879684  Size: SH
  1. Partially install the door trim plate (2) to the door trim panel.
  2. Connect the electrical connector to the door lock switch, if equipped.
  3. Align the door trim plate (2) to the door trim panel
  4. Caution: Refer to Fastener Caution in the Preface section.

  5. Install the screw (1) and tighten to 1.9 N·m (17 lb in).
  6. Install the inside door handle bezel. Refer to Rear Door Inside Handle Bezel Replacement.