For 1990-2009 cars only
Removal Procedure
- Remove the center seat belt retractor seat belt opening trim (1).
- Remove the center seat belt retractor trim cover bolt (1).
- Remove the center seat belt retractor trim cover (2).
- Carefully pull the rear seat back trim down enough to expose the center seat belt retractor bolt.
- Remove the seat belt center retractor bolt.
- Slide the center seat belt retractor up and out of the key hole slots on the seat back frame.
- Partially remove the seat cushion cover (1) in order to gain access to the center seat belt retractor lower bolt (2).
- Remove the center seat belt retractor lower bolt (2).
- Remove the center seat belt retractor assembly from the vehicle.
Installation Procedure
- Install the center seat belt lower belt (3) to the seat cushion frame.
- Install the center seat belt retractor lower bolt (2) and tighten to 52 N·m (38 lb ft).
- Install the seat cushion cover (1).
- Slide the center seat belt retractor into key hole slots in the seat back frame.
- Carefully pull the rear seat back trim down enough to expose the center seat belt retractor bolt hole.
- Install the center seat belt retractor bolt and tighten to 52 N·m (38 lb ft).
- Install the center seat belt retractor trim cover (2).
- Install the center seat belt retractor trim cover bolt (1) and tighten to 1.5 N·m (13 lb in).
- Install the center seat belt retractor seat belt opening trim (1).
Caution: Refer to Fastener Caution in the Preface section.
