Fill Valve Access Cover Replacement KL6

1. Remove the screws (3) that retain the fuel filler door to the body.
2. Remove the fuel filler door from the body.

1. Position the fuel filler door to the body.

Notice: Use the correct fastener in the correct location. Replacement fasteners must be the correct part number for that application. Fasteners requiring replacement or fasteners requiring the use of thread locking compound or sealant are identified in the service procedure. Do not use paints, lubricants, or corrosion inhibitors on fasteners or fastener joint surfaces unless specified. These coatings affect fastener torque and joint clamping force and may damage the fastener. Use the correct tightening sequence and specifications when installing fasteners in order to avoid damage to parts and systems.

2. Install the fuel filler door retaining screws (3) to the body.

Tighten
Tighten the screws to 5 N·m (44 lb in).

Fill Valve Access Cover Replacement KL8

1. Remove the screws (3) and spacers (2) that retain the fuel filler door to the body.
2. Remove the fuel filler door from the body.

1. Position the fuel filler door to the body.

Notice: Use the correct fastener in the correct location. Replacement fasteners must be the correct part number for that application. Fasteners requiring replacement or fasteners requiring the use of thread locking compound or sealant are identified in the service procedure. Do not use paints, lubricants, or corrosion inhibitors on fasteners or fastener joint surfaces unless specified. These coatings affect fastener torque and joint clamping force and may damage the fastener. Use the correct tightening sequence and specifications when installing fasteners in order to avoid damage to parts and systems.

2. Install the fuel filler door retaining screws (3) and spacers (2) to the body.

Tighten
Tighten the screws to 5 N·m (44 lb in).