GM Service Manual Online
For 1990-2009 cars only
Makes 🢒 Chevrolet 🢒 2003 🢒 Express - AWD 🢒 Body and Accessories 🢒 Interior Trim 🢒 Body Hinge Pillar Trim Panel Replacement

Removal Procedure
  1. Remove the knee bolster. Refer to Driver Knee Bolster Replacement for the left knee bolster panel or Passenger Knee Bolster Replacement for the right panel.

    2. Object Number: 892052 Size: SH
  2. Gently pull the hinge pillar trim panel in order to release the retaining clips.
  3. Remove the hinge pillar trim from the vehicle.
  4. Inspect the hinge pillar trim panel for broken or missing retaining clips. Replace the retaining clips as needed.

Installation Procedure

    Object Number: 892052 Size: SH
  1. Install the hinge pillar trim panel to the vehicle.
  2. Align the locator pins. Press on the hinge pillar trim panel in order to engage the retaining clips.
  3. Install the knee bolster. Refer to Driver Knee Bolster Replacement for the left knee bolster panel or Passenger Knee Bolster Replacement for the right panel.