GM Service Manual Online
For 1990-2009 cars only
Makes 🢒 Chevrolet 🢒 2003 🢒 Express - AWD 🢒 Body and Accessories 🢒 Frame and Underbody 🢒 Front Tie Down Bracket Replacement

Removal Procedure

    Object Number: 829096 Size: SH
  1. Raise and support the vehicle. Refer to Lifting and Jacking the Vehicle .
  2. Remove the tie down bracket to the frame mounting bolts, left side only.
  3. Remove the tie down bracket from the frame.

Installation Procedure

    Object Number: 829096 Size: SH
  1. Install the tie down bracket to the frame.

    2. Notice: Use the correct fastener in the correct location. Replacement fasteners must be the correct part number for that application. Fasteners requiring replacement or fasteners requiring the use of thread locking compound or sealant are identified in the service procedure. Do not use paints, lubricants, or corrosion inhibitors on fasteners or fastener joint surfaces unless specified. These coatings affect fastener torque and joint clamping force and may damage the fastener. Use the correct tightening sequence and specifications when installing fasteners in order to avoid damage to parts and systems.

  2. Install the tie down bracket to the frame mounting bolts.

    3. Tighten
    Tighten the bolts to 30 N·m (22 lb ft).

  3. Lower the vehicle.